Phone X full schematic searchable (Qualcomm Edition)

I Phone X Qualcomm Edition SCH 051 02221 051 02222 PCB 820 00863 09 820 00864 06 Download

iPhone 7 Full Solutions List Qualcomm Version

Solutions list for iphone 7 Qualcomm version No backlight, not charging, no camera, no proximity, low signal, searching dead, no compass, no wifi, no bluetooth, no touch, no 3d touch, no sound, no display, error 56 4013 -1… Read More

iPhone 7 A10 CPU NO TOP Resistance Values Ways

iPhone 7 A10 CPU with top half removed, resistance values taken using fluke multimeter.

iPhone 8 Plus Full Resistance Map Ways Solution

Here is the full resistance map pinouts for main IC chips inside the iphone 8 plus motherboard 🙂

iPhone 8 Plus Touch Screen Ways Solution

Here are the components you need to look at when repairing no touch issues on the iPhone 8+ . U5600 is the Chestnut display driver/boost IC, it is the same part across these models: 5c & 5s –… Read More

iPhone X Full Resistance Map (Connectors) Ways Solution

Here is full resistance pinout for iPhone X motherboard. This is useful in troubleshooting issues with any component that connects to the board via these FPC’s. This map is best used with the correct schematic for your model.

iPhone X Water Damage Boot Loop Error 4013 Solution

  Error 4013 in itunes is usually related to an IC2 issue, this can be many faults from CPU to Tristar to modem, most chips are underfilled except for a lot of the chips related to the MODEM…. Read More

iPhone X Draws 700ma 800ma Then 0ma Jumps Solution

Check C2647 Capacitor specs: 4uF 20% Tolerance 4 Volts, X5R Class 0201 Package Knock it off the board with the ferocity of a thousand old bony nuns  

iPhone X Error 56 Solution – Hardware Solution

Bad solder joints here can cause Error 56 in itunes, these points look to be for communication between CPU and NFC. REMEMBER IPHONE X USES LOW TEMPERATURE SOLDER TO JOIN TWO HALVES!!