iPhone 7 Plus Stuck Logo 73Ma

iPhone 7 plus stuck on boot logo with 73ma current draw. U2301 is camera PSU ic

iPhone 7 common IC Jumpers

Some IC’s on the iphone 7 can be jumped using wire, be careful, some of these IC are current regulators and although they can be jumped, a short may become a big problem.

iPhone 7 Plus No Service After Water Damage Solution Ways

After water damage repair the phone reboots and has no service, check capacitor C6619_RF it may be shorted 🙂

iPhone 7, 7 Plus , 8 & 8 Plus Home Key Sensitive After Repair

A super sensitive home key on 7 and 8 models is usually caused by damage to the U10 Turtle IC on the home key flex. Sometimes it can be caused by damage to the flex itself or just… Read More

iPhone 7 Plus Sleep Death Restart Solution Ways

Inductors L1801 and L1810 can be responsible for random reboots. FOR iPhone 7 and iPhone 7+

iPhone 8 Plus Full Resistance Map Ways Solution

Here is the full resistance map pinouts for main IC chips inside the iphone 8 plus motherboard 🙂

iPhone 8 Plus Touch Screen Ways Solution

Here are the components you need to look at when repairing no touch issues on the iPhone 8+ . U5600 is the Chestnut display driver/boost IC, it is the same part across these models: 5c & 5s –… Read More

iPhone X Motherboard Parts Chip Locations